CNC precision machining
Second, a good power supply guarantee.

In order to avoid the influence of large fluctuation of power supply (greater than ±10%) and possible instantaneous interference signals, CNC machining equipment generally adopts dedicated line power supply (such as a separate channel from the low-voltage power distribution room for CNC machine tools) or additional voltage stabilizers, etc. , can reduce the impact of power quality and electrical interference.

3. Formulate effective operating procedures.

In the use and management of CNC machine tools, a series of practical and effective operating procedures should be formulated. For example, lubrication, maintenance, rational use and standardized shift system are the main contents of the use and management of CNC equipment. To formulate and abide by the operating procedures for aluminum alloy CNC machining is one of the important measures to ensure the safe operation of CNC machine tools. Practice has proved that many failures can be reduced by following the operating procedures.

As we all know, correct operation and maintenance is one of the key factors for the correct use of aluminum alloy cnc processing equipment. Correct operation and use can prevent abnormal wear and tear of machine tools and avoid sudden failures; daily maintenance, equipment maintains a good technical state, delays Deterioration process, timely detection and elimination of hidden troubles, and always ensure safe operation. The daily use requirements for precision parts processing enterprises using aluminum alloy cnc processing are as follows:

1. After turning on the machine, it must be preheated for about 10 minutes before processing; the preheating time should be extended for machines that are not used for a long time;

2. Check whether the oil circuit is smooth;

3. Place the table and saddle in the center of the machine before shutting down (move the three-axis travel to the middle of the travel of each axis);

4. Keep the machine tool dry and clean.

Aluminum alloy CNC processing equipment is relatively expensive, so correct operation and maintenance can prevent abnormal wear and tear of the machine tool and avoid sudden failure of the machine tool. Careful maintenance of aluminum alloy CNC machining can maintain the long-term stability of the machining accuracy of the machine tool and prolong the service life of the machine tool.