For the problem of tool size offset: when we can't find a reasonable tool during processing, we can solve the problem by ourselves. If the offset does not affect the processing, we can adopt the method of offsetting in G60. The offset is: (theoretical tool size - actual tool size) ÷ 2 = offset . We need to determine the direction of the offset in combination with the actual machining. The use of G41 and G42: I will think carefully about the problem of knife compensation in the near future. 2011-3-22 night made a big mistake, an unacceptable mistake for those of us who have worked for three years. We may usually look for the pin holes when we repair the mold, but we also have to be optimistic about the places given by the programming. It is because the programming is too vague about the place in the subsection, thinking that it is for distribution nails, and the program is divided into a punching hole, and the program runs wrong and hurts the cutting edge of the stripping board.

Rongna:  IGES (.igs) /STEP (.stp) /Parasolid (.x_t) / .stl files.

Rongna: Sure. We never divulge customers' information to anyone else.

Rongna : 1 pcs , we provide prototype to mass production service

Rongna : We have profesional QC department to guarantee the quality.

 

Rongna: Prototype can finish as fast as 1 day ! depends on your quantity .

 

Rongna : Express ( Fedex /UPS /TNT ), Sea Shipping , air Shipping