CNC Machining Parts Supplier
When the CNC is just turned on, the three-axis origin return should be performed to check whether the guide oil and spindle hydraulic oil of the machine are sufficient. Not enough to refuel in time. The size of the workpiece to be processed should correspond to the drawings, and even if there is only a small gap, you must ask the above management or programming. If the program is broken during the processing, it is easy to make mistakes when changing the program, so it must be checked in time. When the tool needs to be changed during processing, the XYZ axis should be reset to zero at the same time as a single block.

CNC Machining Parts Supplier
Materials Available- Plastic	ABS /PC /PP /POM /PE ect...
Materials Available- Metal	aluminum/ stainless steel /steel / brass ect...
Surface Treatment	polishing /anodizing / painting ect...
Processing	CNC Turning, Milling parts, Drilling, Auto Lathe, Tapping, Bushing, Surface Treatment, etc.
Drawing Formats	> SolidWorks (.sldprt)> ProE (.prt)> IGES (.igs)> STEP (.stp)> Parasolid (.x_t)> .stl
Tolerance丨Surface Roughness	+/-0.005 - 0.01mm 丨 Ra0.2 - Ra3.2（Customize Available)

PLASTIC CNC MACHINING 




METAL CNC MACHINING 







5 axis /3 axis MACHINING










 
NINGBO RONGNA TECHNOLOGY CO.,LTD
we help client Develop New Products, form Sample to mass Production.